Festool CTL 26 E Original Instructions

Not possible to switch on: contact Festool
service workshop.
7.5 AutoClean – cleaning the main filter
(variants with AutoClean only)
Only in conjunction with a disposable
bag (to comply with dust class "L"). Not
for use during wet extraction.
Automatic dedusting
Activate AutoClean or set the frequency using
the rotary knob [1-7] (depending on the mobile
dust extractor variant).
Manual dedusting
Turn the switch [1-8] to the AC symbol.
Full manual cleaning
► Cover the end of the nozzle or suction hose
with your hand or CT-VS closing slide for
two seconds.
► Turn the switch [1-8] to the AC symbol.
8 Working
8.1 Handling
Hose holder: After finishing work, you can feed
the suction hose through the opening [8-2] and
place it in the hose holder.
SysDoc Systainer storage area: A Systainer can
be fastened to the storage area with the four
slides or the T-Loc lock [8-1].
8.2 Extracting dry materials
CAUTION
Hazardous dust
Damage to the respiratory passage
► Always use a filter or disposal bag!
When extracting dust that exceeds the
permitted limit values, only extract from
a single machine (electric or air tool).
Observe the following when extracting dust
generated by operating electric power tools:
Ensure there is adequate ventilation! Observe
regional regulations!
Limit values: exhaust air max. 50% of the clear
air volume
Formula: room volume V
R
x air renewal rate L
W
8.3 Extracting wet materials/liquids
Remove the filter/disposal bag.
Use a special wet filter (NF-CT).
The dust extraction stops automatically when
the maximum fill level is reached.
It must be ensured that the machine (main fil
ter, suction hose, container, etc.) is sufficiently
dried after extracting wet materials.
CAUTION
Hazardous dust
Damage to the respiratory passage
► After extracting wet materials, remove the
wet filter and replace it with the main filter
for dry materials.
CAUTION
Escaping foam and liquids
► Switch off and empty the machine immedi
ately.
8.4 After finishing work
► Variants with AutoClean only: Clean the
main filter automatically or manually (see
section 7.5)
► Switch off the mobile dust extractor and
pull out the mains plug.
► Wind up the mains power cable.
► Empty the dirt trap.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
► All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/service
EKAT
1
2
3
5
4
English
18

Festool CTL 26 E Specifications

General

Input power	2400 W
Airflow	65 l/s
Capacity	26 L
Hose length	3.5 m
Cable length	7.5 m
Hose diameter	27 mm
Filter surface	6318 cm²
Number of wheels	4 wheel(s)
Container capacity (dust)	24 L
Ventilating pressure (max)	240 mbar
Dust class	L
Product color	Black, Green, White

Weight and Dimensions

Depth	630 mm
Width	365 mm
Height	540 mm
Weight	13900 g