p30 GoTo Seat User Manual
English
Retrieve the straps for the
GoTo Seat insert, with straps
B
and
C
at the rear of the
GoTo Seat base and straps
A
(the longest straps) at the
seat pad.
Thread the buckle of each
black strap (not the fastening)
through the holes in the
upholstery rst, followed
by the hole in the insert.
As with the above straps,
thread the buckle of the
groin strap through its
corresponding hole in the
upholstery at the bottom
of the seat pad, followed
by the plastic base.
Once all of the straps are
inserted, place the insert
into its upholstery.
1
2
3
4
2
A A
C C
B B
Slide the widest
part of the GoTo
Seat base into the
upholstery rst.
For Size 1, open the
Velcro of the seat
base before this.
SECTION 19: Putting the
upholstery back on and
assembling GoTo Seat
19(a) Straps & Upholstery
To Next Page
Loading...
Need help?
General