Care and maintenance
Ensure that the heater is disconnected and cleaned periodically.
To clean the heater:
1. Disconnect the power cable
2. Remove the safety bars
3. Wipe the front with a soft damp cloth. Use a gentle detergent. Be careful to clean the surface very
carefully without leaving finger prints or scratches.
Warning: some cleaning products would damage the heater.
Technical specification
• Power supply 220V - 240V ~ 50Hz
• Wattage max 2000w
• Remote control 7m
Unpack the halogen heater making sure that all the items are present and that
there are no components left in the box and that the heater head is free from
any packing material.
Using the detailed drawing follow the steps to assemble your halogen heater.
Do not connect the halogen heater to the electrical supply until all the assembly
is complete.
Do not connect the halogen heater to the electrical supply if any of the
components or the power cord is damaged in any way.
If in doubt contact your supplier.
Primrose
info@primrose.co.uk
Tel: 0118 9035210(UK)
Tel: 0044 118 9035210(outside of UK)
To Previous Page
Loading...
Need help?
Power
Remote Control
