Upsee User Manual p9
SECTION 07:
Daily Product
Inspection
We recommend that various checks
or the Upsee are carried out before
use to ensure the product is safe. The
recommended checks are detailed
below:
• Check buckles and poppers are in
place and secure
• Check all upholstery for signs of
wear and tear including Velcro
strips
• Check all webbing / straps are
secure and there are no signs of
wear or tear cause the stain to
spread.
If in any doubt to the
continued safe use of your
Firey product or if any
parts should fail, please
cease using the product
and contact our customers
services department as
soon as possible.
SECTION 08:
Re-issuing Firey
Product
Before re-issuing a product, it is
recommended that it is disinfected
using one of the following procedures:
Note: Always clean the product rst
to remove accumulated soiling prior to
disinfecting/sanitising.
1. Where possible, we recommend
the use of an automated “fogger”
disinfection system that is used
to completely cover the product
surfaces with a disinfectant agent.
The manufacturer’s instructions
for the chosen system should
be referred to prior to use and
followed exactly.
2. Where an automated disinfection
system is not available, all product
surfaces should be wiped over
with disinfectant surface wipes or
liquid disinfectant on a soft cloth.
Suitable products are 70% IPA,
70% Alcohol or diluted bleach. The
manufacturer’s instructions for the
chosen product should be followed.
Product upholstery and fabrics
should be cleaned thoroughly in
accordance with section, Cleaning
and Care Information, of this
manual.