First Alert Onelink Safe & Sound User Manual

6
Smoke & Carbon Monoxide Alarm
LED Color
Patterns
Smoke / CO Events Voice Guide
Power Up Power Up
Programming, Silencing & Pairing “[Location, example: “Hallway”] Location saved.”
Testing
“The testing is complete.”
[Test Complete - interchanging to next test/Safe & Sound out of
alarm mode]
Welcome
Hello and welcome to your Onelink Safe & Sound. Download
the Onelink Home App through the App Store or Google
Play. The app will walk you through the process.
Power Indicator and Night Light N/A
Pairing N/A
Testing
“This is only a test. The alarm will sound and for your protection
is very loud. The test will start in 5 seconds. 5...4...3...2...1.”
Power Indicator when
Night Light is Off
N/A
Testing
“Testing smoke” [beep beep beep!]
“Testing carbon monoxide” [beep beep beep beep!]
“Evacuate, evacuate, there’s fire in the [Location]!”
“Highest carbon monoxide level was 0 PPM.”
Emergency
“Evacuate! Evacuate! There is smoke [or
carbon monoxide] in the [Location!]!”
“Highest carbon monoxide level was [Number] PPM.”
Malfunction
“Error, please see users manual or contact customer service.”
“Alarm has reached its end of life. Replace your alarm.”
Low Battery N/A
Main Alexa Color Patterns For When You Are Using Alexa On Your Safe & Sound
Solid Blue with Cyan Alexa is busy processing your request. The device is starting up.
Half Red
Mute: You have turned off the microphones on your device [tone].
*Note: Two (2) LEDs will remain red while the device is muted.

First Alert Onelink Safe & Sound Specifications

General

Brand	First Alert
Model	Onelink Safe & Sound
Category	Security System
Language	English