30
USING YOUR WATER DISPENSER
(ICE & WATER MODELS ONLY)
Dispensing
Your water dispenser has been designed for one-handed
operation.
To dispense water push the dispensing pad gently, using a glass
or container. This pad requires only a gentle press to activate.
To stop the flow of water, simply pull your glass away from the
dispensing pad.
Please remember that pressing very hard against the
dispensing pad will not encourage the dispenser to operate
faster or produce greater quantities of water.
First use
Before using your water dispenser, the water filter must be installed and flushed to
remove any impurities or trappedair inthe filter system. Refer to ‘Before you start using
the Ice & Water or Automatic Ice function’ for details.
IMPORTANT!
To avoid damage to property or personal injury do not put hands, fingers or objects
up the dispenser opening.
Please note that once installation is complete a few drips may appear out of the
dispenser over the next few days as the remaining trapped air is cleared.
Dispenser Lock
The ‘Dispenser Lock’ prevents water from being dispensed.
This is useful when you are cleaning the external display or
when there are small children around.
Press and hold the button for 4 seconds to activate
‘Dispenser Lock’.
The light above the ‘Dispenser Lock’ icon will be illuminated.
Pressing the water dispenser pad will cause a raspberry
sound indicating to the user that water cannot be dispensed.
To de-activate the ‘Dispenser Lock’, press and hold the
button for 4 seconds. The light above the ‘Dispenser Lock’
icon will no longer be illuminated and water dispensing will
be enabled.
Water dispenser
Dispenser Lock
To Next Page
Loading...
Need help?
General
