25
ACTIVESMART™ OPERATING INSTRUCTIONS
Using your ice maker
(Ice & Water and automatic ice models only)
Ice On/Off
Your ice maker is designed to automatically dispense ice
into the ice storage bin below until it detects the bin is
full. The more ice you use, the more it makes.
First use
The ice maker will be off when you turn your refrigerator
on for the first time after installation. The light above the
‘Ice On/Off’ icon will be off.
To turn your ice maker on press the button. The light
above the ‘Ice On/Off’ icon will be illuminated when the
ice maker is on.
Press and hold , and together for 4seconds then close the door(s). The ice tray
will flip twice and empty the water into the bin below. The ice tray will flip only after the
doors are closed.
Repeat the cycle to help remove any dust in the ice tray collected during manufacture
and transport.
Empty the water in the bin and return the bin correctly. Ensure that the scoop is located
in front of the bin.
Once your ice maker is turned on, discard the first 3harvests of ice (8cubes per harvest).
This will flush away any impurities in the water line and ensure the best ice quality.
Carrying out the above steps after a holiday/vacation or extended periods of not using ice.
Ice bin and scoop
Turning ice maker on
To Next Page
Loading...
Need help?
General
