Loading suggestions
When loading your drawer, make sure that
you place items so that water coming from the rotating spray arms below can reach all areas
(wash performance will be reduced if it can't)
nothing blocks the water from getting to items on the adjustable racks
glass and other fragile items are stable, so that they do not accidentally topple and break during
the wash.
How NOT to moad your drawer
Overcrowded and wash water will not
reach some of the dinnerware.
Cups, glasses and bowls must have their
openings facing down.
The plates are nesting together and wash
water may not get through.
Ensure cutlery are not nesting or stuck
together. They need to be evenly spread
out.
@
@
Ensure dishware items are not forced into
or protrude out of the drawer, as this may
prevent the internal lid of the drawer from
properly sealing which could result mna
service call.
Locate sharp items safely to prevent injuring
the user and damaging the lid assembly.
Check the bottom of the cutlery basket to
ensure sharp or pointed items have not come
through as they may stop spray arm rotation.
Ensure cutlery has not fallen through the
base rack and stopped the spray arms from
rotating.
The large bowl [s blocking wash water
reaching the adjustable racks.
Large utensils should be on the adjustable
racks so they do not become dislodged and
stop the spray arms from rotating.
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
To Next Page
Loading...
Need help?
General
