A
• The Loose Parts Pack is packaged under-
neath the deck.
Assembly of Lower Handles to Deck
1. Place the bolt (A2) through the hole in the lower
handle (A1) until the lower handle fits into the
recess (A3)
2. Place the washer (B1) and the wing knob (B2)
on to the bolt and tighten the wing knob.
3. Repeat on the other side.
Assembly of Upper Handles to Lower Handles.
1. Ensure the upper handle is located correctly
with the lock-off button on the switchbox upper-
most.
2. Ensure the upper handle (C1) and the lower
handle (C2) are aligned correctly.
4. Fit the bolts (C3), washers (C4) and wing knobs
(C5). Tighten the wing knob.
5. Fit the cable to the handles with the clips provid-
ed. Make sure the cable is not trapped between
the upper and lower handles.
Grassbox Assembly
1. Slide the grassbox tongue into the slots in the
grassbox lower until it clicks securely into posi-
tion (D)
2. Push the grassbox handle into the slots in the
grassbox upper until it clicks securely into posi-
tion. (E)
3. Starting at the rear of the grassbox, locate the
grassbox upper into the grassbox lower by
aligning the clips (F1). Ensure all clips are cor-
rectly located.(F2) before clicking into position.
4. Clip the two halves together, ensuring all clips
are securely connected.
Assembly Instructions
B
C
D
1
E
F1 F2
2
3
1
2
1
2
3
4
5
To Next Page
Loading...
Need help?
General
