Name: Force STABLE
Brand: Force
Rating: 5 (1 reviews)

To Next Page

To Previous Page

- 3 -

How To Assemble

Required Tools

(Included in the kit)

(Not supplied)

M5 Hex Wrench ..... 1

10mm Spanner

..... 1

1 2

Install Rear Frame into Step-Bar with

M6x30 screws in the Parts Pack–C.

Install Front Frame into Step-Bar with M6x30 screws in the

Parts Pack–C.

Install Lower Arm to the side bracket on Front Frame with two M6x35 screws in

the Parts Pack–B, then connect Upper Arm onto Lower Arm with M6x30 screw in

the Parts Pack–A.

The arm is position adjustable in 2 levels by changing the M6x35 screw insertion

hole.

You don't have to install the arm if you will not

set bike vertically.

Upper Arm must be positioned as shown in the picture.

Inserting arm in wrong direction will compromise stability.

Step-Bar

RearFrame

Screw M6x30

ScrewM6x30

FrontFrame

UpperArm

Lower Arm

Screw M6x30

ScrewM6x35

Questions and Answers:

Need help?

Do you have a question about the Force STABLE and is the answer not in the manual?

Force STABLE Specifications

General