23
%
*
[SR07950(ALL)08/95] Safety Belt Maintenance
*
[SR07970(ALL)09/95]
Check the safety belt systems periodically to
make sure that they work properly and are not
damaged.
%
*
[SR07980(ALL)10/95]
All safety belt assemblies, including retractors,
buckles, front seat belt buckle support assemblies
(slide bar) (if equipped), child safety seat tether
bracket assemblies (if equipped), and attaching
hardware, should be inspected after any
collision. Ford recommends that all safety belt
assemblies used in vehicles involved in a
collision be replaced. However, if the collision
was minor and a qualified technician finds that
the belts do not show damage and continue to
operate properly, they do not need to be
replaced. Safety belt assemblies not in use
during a collision should also be inspected and
replaced if either damage or improper operation
is noted.
%
*
[SR08400(ALL)06/95]
Cleaning the Safety Belts
*
[SR08500(ALL)06/95]
Clean the safety belts with any mild soap
solution that is recommended for cleaning
upholstery or carpets. Do not bleach or dye the
belt webbing because this may weaken it.
%
*
[SR14300(ALL)06/95] Air Bag Supplemental Restraint
System (SRS)
*
[SR14650(ALL)05/95]
The driver and right front passenger air bags are
Supplemental Restraint Systems (SRS), provided
at these seating positions in addition to the
lap/shoulder belt, and are designed to
supplement the protection provided to properly
belted occupants in moderate to severe frontal
collisions. The supplemental air bag system does
not provide restraint to the lower body.
File:03fcsrt.ex
Update:Mon Jan 22 15:46:18 1996
To Next Page
Loading...
Need help?
General
