106
*
[GF02300(ALL)02/96]
NOTE: If you are driving down a long or
steep hill, shift to a lower gear and do
not apply your brakes continuously. If
you apply your brakes continuously,
they may overheat and become less
effective.
[GF02400(ALL)02/97]
Occasional brake noise is normal and does not
indicate a performance concern with the vehicle’s
brake system. In normal operation, automotive
brake systems may emit occasional or
intermittent squeal or groan noises when the
brakes are applied. Such noises are usually
heard during the first few brake applications in
the morning; however, they may be heard at any
time while braking and can be aggravated by
environmental conditions such as cold, heat,
moisture, road dust, salt or mud. If a
“metal-to-metal” or “continuous grinding” sound
is present while braking, the brake linings may
be worn-out and should be inspected by a
qualified service technician.
[GF03000(ALL)01/96]
Anti-lock Brake System (ABS)
(If equipped)
[GF03050(ALL)02/97]
On vehicles equipped with an antilock braking
system (ABS), a noise from the hydraulic pump
motor and pulsation in the pedal may be
observed during ABS braking events. Pedal
pulsation coupled with noise while braking
under panic conditions or on loose gravel, wet
or snowy roads is normal and indicates proper
functioning of the vehicle’s antilock brake
system. If the vehicle has continuous vibration or
shudder while braking, felt mainly in the
steering wheel, the vehicle most likely needs
service.
[GF03100(ALL)01/96]
The Anti-lock Brake System (ABS) prevents the
brakes from locking up. Whenever your wheels
start to lock during maximum braking, the
File:09icgff.ex
Update:Tue Mar 4 08:54:55 1997
To Next Page
Loading...
Need help?
General
