Ford 2000 User Manual

ATTACHMENT
OF IMPLEMENTS SECTION D
THREE-POINT LINKAGE
LINKAGE
CATEGORIES
Ford tractors
are
supplied with
the
following
linkage categories:
Ford 2000
and 3000
Category 1
Ford
4000
and 5000
Category 2
TOP LINK ((f) Figure Df)
The lop link is adjusted by releasing the locknut
(a
latch on the Ford
5000)
and
rotating the sleeve until the desired length
is
obtained.
HYDRAULIC
LIFT ROCKER
((2)
Figure Df, and Figure D2)
Better
sensitivity of control may
be
obtained
by changing the pivot point of the
rocker or the position of the top
link
on the rocker
:
Ford 2/3/5000. Use
(1
) Figure D2 for light draft operation
(2)
Figure D2 for heavy draft
operation
Ford
4000. Use
(1
)
Figure D2 for heavy draft
operation
(2)
Figure D2
for light
draft operation
LEVELLING BOX
{(3)
Figure Df}
A
levelling
box
is provided
on the
right-hand
lift rod to
control
the
level
of the
implement. Turn the lever clockwise to lengthen and anticlockwise to shorten
the
rod.
IMPLEMENT ATTACHMENT
When connecting linkage mounted implements attach the left-hand lower link
first, then the right-hand link (which can be raised or lowered using
the
levelling box), and finally the top link. This operation
is
much
easier if the tractor
is correctly aligned with the implement.

Ford 2000 Specifications

General

Brand	Ford
Model	2000
Category	Tractor
Language	English