To Next Page

To Previous Page

Replacing high-mount brake and cargo lamp bulbs

Make sure the headlamp control is

in the OFF position.

1. Remove the two screws and move

the lamp assembly away from the

vehicle to expose the bulb sockets.

2. Remove the bulb socket by

rotating counterclockwise and

pulling it out of the lamp assembly.

3. Pull the bulb straight out of the socket and push in the new bulb.

Install the new bulbs in reverse order.

2008 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

Ford 2008 Explorer Sport Trac User Manual

Questions and Answers: