To Next Page

To Previous Page

Resuming a set speed

Press the RESUME control and

release it. This will automatically

return the vehicle to the previously

set speed.

Increasing speed while using speed control

There are three ways to set a higher

speed:

• Press and hold the SET + control

until you get to the desired

speed, then release the control.

• Press and release the SET +

control to operate the Tap-Up

function. Each tap will increase

the set speed by 1 mph

(1.6 km/h).

• Use the accelerator pedal to get to the desired speed. When the

vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are three ways to reduce a

set speed:

• Press and hold the SET- control

until you get to the desired

speed, then release the control.

• Press and release the SET-

control to operate the Tap-Down

function. Each tap will decrease

the set speed by 1 mph

(1.6 km/h).

• Depress the brake pedal or the clutch pedal (if equipped) until the

desired vehicle speed is reached and press the SET + control.

2009 Escape Hybrid (ehv)

Owners Guide, 2nd Printing

USA (fus)

Driver Controls

Ford 2009 Escape Hybrid User Manual

Other manuals for Ford 2009 Escape Hybrid