PANEL DIMMER CONTROL
With liftgate release:
• Press repeatedly or press and
hold until the desired level is
reached.
Without liftgate release:
• Press the right control repeatedly
to brighten incrementally or press
and hold until the desired level is
reached
• Press the left control repeatedly
to dim incrementally or press and
hold until the desired level is
reached.
Note: If the low voltage battery under the hood is disconnected,
discharged, or a new low voltage battery is installed, the dimmer will set
the illuminated components to the maximum setting automatically. This
will ensure that your displays are visible under all lighting conditions.
The brightness can then be adjusted to the users preference.
Lighting 83
2014 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing, May 2013
USA (fus)
To Next Page
Loading...
