54
1 POWER TILT
AND TELESCOPE
STEERING COLUMN*
Use the controls to adjust
the steering wheel to your
desired position.
2 CRUISE CONTROL
To set your cruise
control speed:
A. Press the ON control up
and release.
B. Accelerate to the
desired speed.
C. Press the SET control up
and release, then take your
foot off the accelerator.
To disable, press the OFF
control down.
3 LEFT VEHICLE
INFORMATION DISPLAY
Provides information about
various systems on your
vehicle. Use the left, 5-way
controls, located on the
steering wheel, to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4 SERVICE ENGINE
SOON LIGHT
Illuminates briefly when
you switch the ignition on. If it
remains on or blinks after you
start the engine, the On-Board
Diagnostics system (OBD-II)
has detected a problem. Drive
in a moderate fashion and
contact your authorized dealer
as soon as possible.
5 RIGHT VEHICLE
INFORMATION DISPLAY*
Displays information about
Entertainment, Phone and
Navigation*. Use the right,
5-way controls located on
your steering wheel to scroll
through, highlight and make
minor adjustments within a
selected menu. Refer to the
MyFord Touch chapter in your
Owner’s Manual for
more information.
6 STEERING WHEEL
AUDIO AND MEDIA
CONTROLS
Press VOL+ or – to
increase or decrease
volume levels.
Press SEEK
or to
access the next or previous
radio station preset, CD
track or preset satellite
radio channel*.
Press to access
voice recognition.
Press to connect or
disconnect a phone call.
7 PUSH BUTTON START*
Allows you to start your vehicle
by pressing the ENGINE
START STOP button while
fully pressing down on the
brake pedal. Press the button
again to switch the engine off.
If you leave your vehicle idling
for an extended period of
time, the engine shuts down
automatically. Before this
happens, a message appears
in the information display,
allowing you time to override
the shutdown feature.
Note: Your intelligent
access transmitter* must
be inside the vehicle for the
ignition to start.
8 HAZARD CONTROL
1 2 5 6 7
8
3
4
.
54
*IF EQUIPPED
FLEX
INSTRUMENT PANEL
FLEX