1. Pull the strap and lift the cushion.
2. Lift the lever and push the seatback
down until it locks.
PUSH BUTTON IGNITION
SWITCH
Switching the Ignition On to
Accessory Mode
Press the push button ignition switch once
without your foot on the brake or clutch
pedal. It is on the instrument panel near
the steering wheel. All electrical circuits
and accessories are operational and the
warning lamps and indicators illuminate.
Press the push button ignition switch again
without your foot on the brake or clutch
pedal to switch the ignition off.
Starting Your Vehicle
Vehicles with Manual Transmission
1. Fully depress the clutch pedal.
2. Briefly press the push button ignition
switch.
Note: Releasing the clutch pedal during
engine starting stops the engine from
cranking.
Vehicles with Automatic Transmission
1. Shift into park (P).
2. Fully depress the brake pedal.
3. Briefly press the push button ignition
switch.
Note: Releasing the brake pedal during
engine starting stops the engine from
cranking.
Vehicles with a Diesel Engine
Note: Engine cranking will not start until the
engine glow plug warning lamp turns off.
This may take several seconds in extremely
cold conditions.
Stopping the Engine When Your
Vehicle is Moving
1. Press and hold the push button ignition
switch, or press it three times within two
seconds.
2. Shift into neutral and use the brakes to
bring your vehicle to a safe stop.
3. When your vehicle has stopped, shift
into park (P) and switch the ignition off.
8
C-MAX (CEU) Vehicles Built From: 16-03-2015 Vehicles Built Up To: 19-07-2015, CG3643en enGBR, Edition date: 02/2015, First Printing
To Next Page
Loading...
Need help?
General
