122
[SS10040(R)01/96]
R WARNING
FAILURE TO REPLACE THE SAFETY BELT ASSEMBLY
UNDER THE ABOVE CONDITIONS COULD RESULT
IN SEVERE PERSONAL INJURIES IN THE EVENT OF
A COLLISION.
[SS10200(R)05/96]
All safety belt assemblies, including retractors, buckles, front
seat belt buckle support assemblies (slide bar) (if equipped)
shoulder belt height adjusters (if equipped) child safety seat
tether bracket assemblies (if equipped), and attaching hardware,
should be inspected after any collision. Ford recommends that
all safety belt assemblies used in vehicles involved in a collision
be replaced. Hoever, if the collision was minor and a qualified
technician finds that the belts do not show damage and
continue to operate properly, they do not need to be replaced.
Safety belt assemblies not in use during a collision should also
be inspected and replaced if either damage or improper
operation is noted.
%
*
[SS10300(R)05/96] Air Bag Supplemental Restraint System
(SRS)
*
[SS10800(R)05/96]
The driver and right front passenger air bags are Supplemental
Restraint Systems (SRS), provided at these seating positions in
addition to the lap/shoulder belt, and are designed to
supplement the protection provided to properly belted
occupants in moderate to severe frontal collisions. The
supplemental air bag system does not provide restraint to the
lower body.
File:06unssr.ex
Update:Fri Mar 21 09:43:41 1997
To Next Page
Loading...
Need help?
General
