While in phone mode, you may also say “Menu” and then any of
the following commands:
• (Phone) settings (message)
notification on
• (Phone) settings (message)
notification off
• (Phone) connections • Phone name
• Signal • Battery
• (Phone) settings (set) phone
ringer
• (Phone) settings (set) ringer 1
• (Phone) settings (set) ringer 2 • (Phone) settings (set) ringer 3
• Text message inbox • (Phone) settings (set) ringer off
Note: With the above commands, words in ( ) are optional and do not
have to be spoken for the system to understand the command.
You may also say “Dial” to access any of the following commands:
• Number 0–9 • Dial
• Delete (deletes one digit) • Clear (deletes all entered digits)
• Plus • Star
• Asterisk (*) • 800 (eight hundred)
• 700 (seven hundred) • 900 (nine hundred)
• 411, 911, (etc.) • # / (pound, slash)
Note: To exit Dial mode, press and hold
or press MENU to go to the
PHONE MENU.
Voice commands when connecting devices
When attempting to connect a phone to SYNC, you may say any of
the following commands:
• Connect <device name> • Bluetooth ON
• Bluetooth OFF • Delete device <name>
Note: You can only connect a device to SYNC after it has successfully
gone through the pairing process.
Note: In the above possible commands, “<name>” is a dynamic listing in
that it could be the name of any previously paired device.
SYNC phone features
13
See
End User License Agreement
at the end of this book
To Next Page
Loading...
Need help?
General
