Fortinet FortiGate Quick Start Guide

9
.
.
QuickStart Guide
Note:
Installing and removing
SFP transceivers can
shorten their useful life.
Do not install or remove
transceivers more than is
necessary.
Follow proper fiber-optic
handling procedures
when installing
and removing SFP
transceivers to ensure
that the devices remain
clean and are not
damaged.
1. Ensure that you are properly grounded.
2. If applicable, disconnect the fiber-optic cable from the transceiver connector and install a
clean dust plug in the transceiver’s optical bores.
3. Pull the extraction lever out and down to eject the transceiver. If you are unable to use your
finger to open the lever, use a small flat-head screwdriver or other similar tool to open the
lever.
4. Hold the sides of the transceiver and carefully pull it away from the cage socket.
5. Replace the cap on the SFP cage socket and place the removed SFP transceiver into an
antistatic bag.
Removal
B

Fortinet FortiGate Specifications

General

Brand	Fortinet
Model	FortiGate
Category	Firewall
Language	English