What to do if my Fortress Technologies Winner 3 will not drive?
- HHannah MillerJul 31, 2025
If your Fortress Technologies Scooter isn't driving as expected, there are several potential causes: * Ensure the jack key is properly inserted into the receptacle. * Check that the connectors in the motor compartment are securely plugged into the controller. * Verify the battery clamps are fastened correctly. * If the scooter is in free wheel position, move the free wheel lever to the BRAKE ENGAGE position, then remove and re-insert the jack key. * If the automatic circuit breaker has jumped out, push it back in and reset the scooter with the jack key. * Inspect for any loose connectors. If you find one, correct the connection if possible; otherwise, contact your dealer.


