Franke MINERVA 119.0179.533 User Manual

07.94.12.389
07.94.12.293
DATA PLATE
1
2
3
4
6
7
5
8
9
10
FRANKE MINERVA 3-IN-1 HOT WATER TAP
HEATING TANK INSTALLATION GUIDE
Introduction
Thank you for purchasing this Franke product, which has been designed
and manufactured to the highest quality standards. This product must
be installed and commissioned by a qualified professional.
Read this installation guide carefully and plan the layout of the
installation carefully before proceeding as failure to install and maintain
this unit in strict accordance with these instructions will render your
product warranty invalid. The manufacturer will not accept liability for
damage or accidents resulting from incorrect installation or operation.
Package Contents
1 Franke heating tank unit
2 15mm copper pipe (optional)
3 T-coupling
4 Pressure relief valve and tundish
5 Data plate (fixed to heating tank)
6 Plastic discharge T piece
7 Flexible plastic hose
8 Sealing ring
9 x2 Compression reducing rings 15-10 mm
10 Water Filter Assembly (supplied in separate box)

Franke MINERVA 119.0179.533 Specifications

General

Brand	Franke
Model	MINERVA 119.0179.533
Category	Kitchen & Bath Fixtures
Language	English

Summary

Introduction to Franke Minerva Tap

Package Contents Overview

Product Application and Safety Information

Intended Use and Pressure Requirements

Specifies the device is for domestic boiling water and details required water pressure range.

Essential Safety Precautions

Highlights mandatory installation by qualified personnel and adherence to safety standards.

Filter and Housing Maintenance

Filter Cartridge Replacement Schedule

Stresses annual replacement of the filter cartridge to maintain efficiency and warranty.

Plastic Housing Lifespan

Advises replacing the filter housing every 10 years due to potential UV degradation.

Installation Preparation and Sequence

Pre-Installation Checks

Includes checking water pressure, planning layout, ensuring ventilation, and identifying pipes.

Step-by-Step Installation Guide

Details the physical connection of components like the stop valve, filter, and waste pipe.

Completing the Installation and First Use

Covers connecting electrical supply, filling, flushing the tank, and initial checks.

Operational Procedures and Troubleshooting

Resetting the Thermal Cut-Out

Instructions for resetting the safety device that shuts off power if the tank runs dry.

Draining the Heating Tank

Procedure for safely emptying the tank for maintenance or relocation.

Common Installation Issues

Addresses problems like dripping tundish, slow flow, spluttering taps, and no hot water.

Addressing Water Quality and Performance

Explains froth formation due to minerals and advises on potential short circuits.

Product Guarantee and Claims

Franke 2-Year Warranty Details

Covers material and manufacturing defects for domestic use, valid from purchase date.

Warranty Exclusions

Lists conditions not covered, including wear and tear, misuse, and improper installation.

How to Make a Warranty Claim

Provides contact information and steps for initiating a service or warranty claim.