Light on/off
10. Press the “LIGHT” button “ ”, the light inside the appliance is on, press this button again,
the light is o.
When Ice Full indicator is on
11.
The ice maker automatically stops working when the ice-cube is full inside and the “ ice full”
Indicator is on.
Open the drawer
12. Hold the drawer handle gently and pull it out along the horizontal direction, until the back
of the drawer contacts the front panel and then gently put it down, the drawer will have a
certain angle hanging in the front panel. Instead, when you need to close the drawer, hold
the drawer handle and place the drawer horizontally, then gently push it into full closure.
Take out the drawer
13. Hold the drawer handle gently and pull it out along the horizontal direction, until the back
of the drawer contacts the front panel, and then gently lifted it up at a certain angle and
pulled it out. Instead, when you need to reload the drawer, you tilt the drawer in the same
direction at a certain angle. First, you put the back side of the drawer into the front panel,
slowly flatten the drawer, and then gently push it into full closure.
USING YOUR ICE MAKER
8
To Next Page
Loading...
Need help?
General
