The “Ice Full” indicator
light is on.
The ice storage is full.
Remove ice from the ice
storage to make
more.
Water tray is blocked by
ice cube or the motor goes
wrong.
Turn off the ice maker, pull
out the electric plug, fill it
with water if needed,
replace the plug and then
restart the unit.
Or push the water tray back
till a click sound and then
pull it forward till a click,
like this for 5 times.Then
restart the unit.
Or check if ice is blocking
the ice pusher. Turn off the
unit, let the ice melt and
restart.
PROBLEM POSSIBLE CAUSES SOLUTION
“Water faucet”
indicator light turns on.
Low water level or lack
of water.
Add water and the
ice maker will operate
automatically.
Check that the plug is
plugged into the electrical
outlet.
Disconnection of plug.There is no indication
on the control panel.
9TROUBLESHOOTING GUIDE
indicating
To Next Page
Need help?
General
