EasyManuals Logo
Home>Frigidaire>Refrigerator>FGHS2655PF

Frigidaire FGHS2655PF User Manual

Frigidaire FGHS2655PF
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
AUTOMATIC ICE & WATER DISPENSER
Priming the Water Supply System
Your refrigerator’s water supply system includes
severaltubinglines,anadvancedwaterlter,
a distribution valve bank, and a reserve tank
to ensure ample supply to the ice and water
dispenser at all times. This system needs to be
completelylledwithwaterwhenrstconnected
to an external supply line.
To prime the water supply system:
1 Beginllingthetankbypressingandholding
a drinking glass against the water dispenser
paddle.
2 Keep the glass in this position until water
comes out of the dispenser. It may take
about minutes.
3 Continue dispensing water for about four
minutestoushthesystemandplumbing
connections of any impurities (stopping to
empty the glass as necessary).
Ice Maker Operation & Care
The ice maker, ice bin, and dispenser feeding
mechanism are located in the top of the freezer
compartment. After the refrigerator is installed
properly and has cooled for several hours, the ice
maker can produce ice within 24 hours. It can
completelyllanicebininabouttwodays.
NOTE
The water dispenser has a built-in device that
shutsoffthewaterowafterthreeminutesof
continuous use. To reset this shutoff device,
simply release the dispenser paddle.
CAUTION
For proper dispenser operation, recommended
water supply pressure should fall between
30 psi and 100 psi. Excessive pressure may
causewaterltertomalfunction.
IMPORTANT
Your ice maker is shipped from the factory
with the wire signal arm in the ON position
(side mounted) or with the switch turned
ON (rear mounted). To ensure proper
function of your ice maker, hook up water
supply immediately or turn ice maker OFF
by lifting the wire signal arm until it clicks
and locks in the UP position (side mounted)
or turn the On/Off switch to the Off (0)
position (rear mounted). If the ice maker
is not turned off and the water supply
is not connected, the water valve will
make a loud chattering noise.
Using the Ice Maker after
Installation
Beforemakingiceforthersttime,besure
to prime the water supply system. Air in new
plumbing lines can result in two or three empty
ice maker cycles. Furthermore, if the system
isnotushed,thersticecubesmaybe
discoloredorhaveanoddavor.
Ice Production: What to Expect
How Much Ice Will a Side Mounted Ice
Maker Produce in 24 Hours?
A side mounted ice maker will produce 4 to
4.5 pounds of ice every 24 hours, depending on
usage conditions. Ice is produced at a rate of
8 cubes every 75 to 90 minutes.
How Much Ice Will a Rear Mounted Ice
Maker Produce in 24 Hours?
A rear mounted ice maker will produce 3 to
4 pounds of ice every 24 hours, depending on
usage conditions. Ice is produced at a rate of
8 cubes every 75 to 90 minutes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frigidaire FGHS2655PF and is the answer not in the manual?

Frigidaire FGHS2655PF Specifications

General IconGeneral
Typefreestanding
Styleside-by-side
Colorstainless steel
Total Capacity26 cubic feet
Refrigerator Capacity16.5 cubic feet
Freezer Capacity9.5 cubic feet
Humidity Controlled Crispersyes
Defrost Systemfrost free
Quick Freezeyes
Number of Refrigerator Door Binsyes
Temperature Controldigital
Interior Lightled
Ice Makeryes
Water Filteryes
Air Filteryes
Door Alarmyes
Smart Homeno
Annual Energy Consumption582 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth35.625 inches
Height69.875 inches
Width36 inches
Net Weight287 pounds

Related product manuals