8
ACCESSORIES INCLUDED & INSTALLATION INSTRUCTIONS
Installation Instructions
In the Cool Mode the appliance must be
placed close to a window or opening so that
the warm exhaust air can be ducted outside.
First position the unit on a flat surface, and
make sure it is within the vicinity of a single
circuit outlet power source. Make sure
there’s a minimum of 31.5" clearance in the
front/back of the unit, and a minimum of
19.7" clearance in the left/right sides of the
unit.
EXHAUSTING HOT AIR
31.5"
19.7"
Remote Control
Safety Lock
Bolts
Foam seal B
Foam seal A
Drain hose
Drain hose and connector
(for heat pump model)
1 pc
Battery 2 pcs
1 pc
2 pcs
1 pc
2 pcs
1 pc
1 set(78.7”(2m))
PARTS: PARTS NAME:
QUANTITY:
Window Kit Connector A
Exhaust hose connector B
Window Kit
Exhaust Hose
Screws
1 pc
1 pc
1 set
1 pc
4 pcs (1/2 screws)
2 pcs (3/4 screws)
Accessories Included
To Next Page
Loading...
Need help?
General
