AVOID SERVICE CHECKLIST
Before you call for service - read this
You may save the cost and inconvenience of an unnecessary service call by first reviewing this easy to use Avoid-
Service Check List of the most frequently encountered situations that are not the result of defective workmanship
of materials.
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective
product workmanship or materials.
Your new appliance is a carefully engineered product. Many times, what appears to be a reason to call for service
requires nothing more than a simple adjustment you can easily make in your own home or is normal operating
characteristic of appliance under certain conditions.
This list is applicable to a variety of models; some of the items will not necessarily applyto your appliance.
PROBLEM POSSIBLE CAUSE / SOLUTION
INSTALLATION
Range is not level.
Cannot move appliance easily.
Appliance must be accessible for
service.
Poorinstallation. Placeoven rack in center of oven. Adjust leveling legs (slide-in models) at base
of range until the oven rack is level.
Besure floor is level and is strong and stable enough to adequately support range.
If floor issagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square and
have sufficient room for range clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to make appliance
accessible.
Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.
RANGE DOES NOT OPERATE
Entire range or oven does not Make sure cord/plug is plugged tightly into outlet.
operate.
Service wiring isnot complete. Contact your dealer, installing agent or authorized servicer.
Power outage. Check house lights to be sure. Call your local electric company for service.
Oven does not operate. Oven control beepsand displaysF1or E3.Electroniccontrol has detected afault condition. Push
the CANCEl_padto clear the display and stop the beeping. Reprogram oven. If fault recurs,
record fault number, push CANCEL pad and contact authorized servicer.
PRINTED IN CANADA
Avoid Service Checklist
21
To Next Page
Loading...
Need help?
General
