DPP275dw_QSG_P2
.
Wifi Setup
DocuPrint P275 dw
Connecting to
the Wireless
Network
http://onlinesupport.fujixerox.com/
NOTE: The printer will auto scan the wireless network for
available SSIDs.
Use the [-] button to find the SSID of your
wireless network and then press the [OK] button.
Use the [+] or [-] buttons to enter the Network Key
(Password). Use the [OK] button to move to the
next character position.
NOTE: When the Network Key (Password) is entered, press
the [OK] button again.
Use the [-] button to select [Yes], to ‘Apply Settings’.
‘Connecting WLAN’ is displayed whilst the connection
is established.
When ‘Connected’ is displayed the wireless connection
has been successfully established. Press the [OK] button.
The WiFi button will be lit solid green.
4
Manual SSID
Use the [+] button to select ‘Infrastructure’, and then
press the [OK] button.
Use the [+] or [-] buttons to enter the
Wireless Network SSID. Use the [OK] button to move
to the next character position. When the Wireless
Network SSID is entered, press the [OK] button.
Use the [-] buttons to select an authentication mode,
choose from: Open System, Shared Key, WPA/WPA2-PSK.
Use the [-] buttons to select the‘Encryption Type’,
and then press the [OK] button.
Use the [+] or [-] buttons to select Network Key
(Password), use the [OK] button to move to the
next character position.
‘Connecting WLAN‘ is displayed whilst the connection is
established.
When‘Connected’ is displayed the wireless connection
has been successfully established. Press the [OK] button.
The WiFi button will be lit solid green.
5
Reset Wireless Network
Settings
3
4
5
5
6
7
8
11
12
2
3
5
6
7
8
9
1
10
NOTE: When the LCD displays ‘Ready’ the network has
been reset.
Find more support for your printer by visiting our
comprehensive support website at:
http://onlinesupport.fujixerox.com/
NOTE: The printer will auto scan the wireless network
for available SSIDs.
NOTE: When the Network Key (Password) is entered, press
the [OK] button.
Use the [-] buttons to select [Yes], to ‘Apply Settings’.
13
Use the [+] button to select
[Setup Wizard], and then
press the [OK] button.
Setup Wizard?
2
Use the [+] button to select
[Setup Wizard], and then
press the [OK] button.
Setup Wizard?
Use the [+] button to select
[<New SSID>], and then
press the [OK] button.
<New SSID>
1
Use the [+] button to select
[Network], and then press
the [OK] button.
Network
Use the [+] button to select
[Network Reset], and then
press the [OK] button.
Network Reset
To keep updated with the latest support videos,
subscribe to the YouTube channel: fujixeroxtv
4
Use the [+] button to select
[ON], and then press
the [OK] button.
ON
Use the [+] button to select
[Network], and then press
the [OK] button.
Use the [+] button to select
[WLAN], and then press
the [OK] button.
Use the [+] button to select
[WLAN Enable], and then
press the [OK] button.
WLAN Enable
Network
WLAN
Use the [+] button to select
[ON], and then press
the [OK] button.
ON
Use the [-] button to confirm
[Reboot OK?]
Reboot OK?