fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: Quality of scanned pictures or photos is not satisfactory when scanning in black
and white.
Back
Did you select halftoning or dithering?
NO
On the scanner driver, select "halftoning" or
"dithering" before scanning documents.
YES
Are the upper/lower glasses and rollers inside
the ADF or the document bed and document
holding pad of the Flatbed (fi-6240 only) clean?
NO
Clean the dirty locations.
(For details on how to clean the dirty locations,
see Chapter "
4 DAILY CARE.")
YES
If you cannot solve the problem after taking
measures, check the items in Section "
6.4
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/04.htm9/28/2007 2:37:45 PM
To Next Page
Loading...
Need help?
General