fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
This section describes troubles that may occur during scanning and how to remedy those troubles.
Before you ask for repair, check the following flowcharts. If the remedies in these flowcharts do not solve the problem, check the
items in Section "
6.4 Items to Check Before Contacting the Dealer Where You Bought the Scanner" and then contact the dealer
where you purchased the scanner or an authorized FUJITSU scanner service provider.
Scanner cannot be turned On.
Indication on Function No. display goes out.
The scanning does not start.
Quality of scanned pictures or photos is not satisfactory when scanning in black and white.
Quality of scanned text of lines is unsatisfactory.
Images are distorted or blurred.
Vertical lines appear in the scanned image.
The Function Number display indicates alarm (with [E] or other alphabetical letter plus a number) after the scanner is turned
ON.
Multifeed errors occur frequently.
Pickup errors occur frequently.
Paper jams occur frequently.
The scanned images are elongated when scanned from the ADF.
There is a shadow on the leading edge of the scanned images.
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03_01.htm9/28/2007 2:37:36 PM
To Next Page
Loading...
Need help?
General