fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: The Function Number Display indicates alarm (with [E] or other alphabetical letter
plus a number) after the scanner is turned ON.
Back
Did you unlock the transport lock of the
Flatbed? (fi-6240 only)
NO
Turn OFF the scanner and unlock the transport
lock, then turn ON the scanner again.
(Refer to "2.1 Installing the Scanner in "fi-
6140/fi-6240 Getting Started.")
YES
Does the Function Number Display indicate
any alarm after turning ON the scanner again?
NO
The scanner operation is normal.
YES
If you cannot solve the problem after taking
measures, check the items in Section "
6.4
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/08.htm9/28/2007 2:37:50 PM
To Next Page
Loading...
Need help?
General