14
Air Cleaning Filter Installation
1. Open the intake grille and remove the air
filters.
3. Install the two air filters and close the
intake grille.
1
2
2
1
Intake Grille
Intake Grille
Mounting
shaft
Knob
2. Install the air cleaning filter set (set of 2).
1 Set the air cleaning filter into the air cleaning filter
frame.
2 Engage the latch at both ends of the filter with the two
hooks at the rear of the air cleaning filter frame.
Take care that the air cleaning filter does not project be-
yond the frame.
3 Engage the four fixing locations at the top and bot-
tom of the air cleaning filter frame with the hooks of
the air filter.
2
1
1
2
1
2
● When air cleaning filters are used, the effect will increased
by setting the fan speed to “High”.
Intake Grille
Intake Grille
Mounting shaft
Bearing
Knob
Mounting
shaft
Knob
Air cleaning filter set
Air cleaning filter frame
Air cleaning filter
Latches (two places)
Rear of the filter
Fixing location, hooks (four places)
Hooks (two places at the rear)
Intake Grille
To Next Page
Loading...
Need help?
General
