EasyManuals Logo
Home>Fujitsu>Air Conditioner>ASY14FSBCW

Fujitsu ASY14FSBCW User Manual

Fujitsu ASY14FSBCW
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
En-5
To Select Mode Operation
1
Press the START/STOP button (Fig.6 R).
The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light.
The air conditioner will start operating.
2
Press the MASTER CONTROL button (Fig.6 L) to se-
lect the desired mode.
Each time the button is pressed, the mode will change in the following
order.
AUTO COOL DRY FAN
About three seconds later, the entire display will reappear.
To Set the Thermostat
Press the SET TEMP. button (Fig. 6 M).
button: Press to raise the thermostat setting.
button: Press to lower the thermostat setting.
Thermostat setting range:
AUTO .................................. Standard temperature setting ± 2 °C
Cooling/Dry ........................ 18-30 °C
The thermostat cannot be used to set room temperature during the FAN mode (the
temperature will not appear on the Remote Controller’s display).
About three seconds later, the entire display will reappear.
The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 6 Q).
Each time the button is pressed, the fan speed changes in the following order:
AUTO HIGH MED LOW QUIET
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling : As the room temperature approaches that of the thermostat setting,
the fan speed becomes slower.
Fan : The fan runs at the low fan speed.
When set to QUIET:
SUPER QUIET Indicator Lamp (Fig. 3 7) will light.
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for qui-
eter operation.
SUPER QUIET operation cannot be used during Dry mode. (The same is true
when dry mode is selected during AUTO mode operation.)
Cooling performance will be reduced somewhat during SUPER QUIET opera-
tion.
OPERATION
ssss
s
Example: When set to COOL.
Example: When set to 26 °C.
In order to increase the drying effect dur-
ing quiet cooling operation, the fan of the
indoor unit may stop.
Example: When set to AUTO.
ssss

Other manuals for Fujitsu ASY14FSBCW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ASY14FSBCW and is the answer not in the manual?

Fujitsu ASY14FSBCW Specifications

General IconGeneral
BrandFujitsu
ModelASY14FSBCW
CategoryAir Conditioner
LanguageEnglish

Related product manuals