1
RX100 S3
1
Checking the items
supplied
Check the contents in the package using the
"Contents List". If any items are missing, contact
an ofce listed in the "Contact Information".
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting, installing internal options
and setting up this server.
In the following case, do not install the internal options
before the OS has been installed.
- Custom Made Service
When installing internal options, perform operations after
reading the following manuals.
"Chapter 7 Installing Internal Options"
"PRIMERGY ServerBooks"/
"Supplement"
Install the OS before installing the following options.
Installing the OS after options have been installed will
cause installation operations to end in an error.
- Hard disk unit in which the OS is not installed
- SCSI optional device (Backup cabinet, etc.)
3
Installing internal options
If internal options have been purchased separately, install them before installing the Operating System.
n
Available internal options and
installation locations
After installing internal options, check that the order and
place of installation are correct and cables are correctly
attached.
n
PRIMERGY RX100 S3 Manuals
Manuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD.
[CD-ROM Drive] :\MANUAL\INDEX.PDF
Manuals can be displayed using Acrobat® Reader® or Adobe® Reader®. If using Acrobat® Reader®, use version 5.0 or later.
To Next Page
Need help?
General