EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY RX1330 M3

Fujitsu PRIMERGY RX1330 M3 User Manual

Fujitsu PRIMERGY RX1330 M3
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
RX1330 M3 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M3 Specifications

General IconGeneral
Processor ARK ID97479
CPU configuration (max)1
Intel Secure Key Technology version1.00
Intel® Quick Sync Video TechnologyNo
Intel® Hyper Threading Technology (Intel® HT Technology)Yes
HDD size2.5/3.5 \
HDD interfaceSerial ATA, Serial Attached SCSI (SAS)
Optical drive type-
Supported HDD sizes2.5, 3.5 \
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Supported storage drive interfacesSAS, Serial ATA
Bus typeDMI3
SteppingB0
Scalability1S
Processor codeSR326
Processor cache8 MB
Processor cores4
Processor modelE3-1270V6
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor threads8
Processor codenameKaby Lake
Motherboard chipsetIntel® C236
Processor frequency3.8 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.2 GHz
Processor operating modes64-bit
PCI Express configurations1x16, 1x8+2x4, 2x8
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)72 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM, DDR4-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor1866, 2400 MHz
Memory bandwidth supported by processor (max)37.5 GB/s
Maximum internal memory supported by processor64 GB
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation Microsoft Windows Storage Server 2012 Standard VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7
Internal memory32 GB
Memory clock speed2400 MHz
Internal memory typeDDR4-SDRAM
Memory layout (slots x size)2 x 16 GB
On-board graphics card modelNot available
Power supply450 W
Number of redundant power supplies supported2
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCE, RoHS, WEEE, GS, CE, CSAc/us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, GOST, KC, CCC, C-TIck, BSMI
PCI Express slots version3.0
Chassis typeRack (1U)
Weight and Dimensions IconWeight and Dimensions
Depth572 mm
Width435.4 mm
Height42.8 mm
Weight13000 g

Related product manuals