EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY RX1330 M3

Fujitsu PRIMERGY RX1330 M3 User Manual

Fujitsu PRIMERGY RX1330 M3
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Operating Manual RX1330 M3
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for Japan: About SATA HDDs
The SATA version of this server supports HDDs with SATA/BC-SATA storage
interfaces. Please note that the usage and operation conditions differ
depending on the type of HDD used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of HDD:
http://jp.fujitsu.com/platform/server/primergy/harddisk/

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M3 Specifications

General IconGeneral
Processor ARK ID97479
CPU configuration (max)1
Intel Secure Key Technology version1.00
Intel® Quick Sync Video TechnologyNo
Intel® Hyper Threading Technology (Intel® HT Technology)Yes
HDD size2.5/3.5 \
HDD interfaceSerial ATA, Serial Attached SCSI (SAS)
Optical drive type-
Supported HDD sizes2.5, 3.5 \
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Supported storage drive interfacesSAS, Serial ATA
Bus typeDMI3
SteppingB0
Scalability1S
Processor codeSR326
Processor cache8 MB
Processor cores4
Processor modelE3-1270V6
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor threads8
Processor codenameKaby Lake
Motherboard chipsetIntel® C236
Processor frequency3.8 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.2 GHz
Processor operating modes64-bit
PCI Express configurations1x16, 1x8+2x4, 2x8
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)72 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM, DDR4-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor1866, 2400 MHz
Memory bandwidth supported by processor (max)37.5 GB/s
Maximum internal memory supported by processor64 GB
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation Microsoft Windows Storage Server 2012 Standard VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7
Internal memory32 GB
Memory clock speed2400 MHz
Internal memory typeDDR4-SDRAM
Memory layout (slots x size)2 x 16 GB
On-board graphics card modelNot available
Power supply450 W
Number of redundant power supplies supported2
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCE, RoHS, WEEE, GS, CE, CSAc/us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, GOST, KC, CCC, C-TIck, BSMI
PCI Express slots version3.0
Chassis typeRack (1U)
Weight and Dimensions IconWeight and Dimensions
Depth572 mm
Width435.4 mm
Height42.8 mm
Weight13000 g

Related product manuals