24
3.1 Flow of Operations
This section describes the flow of operations starting with the scanning of documents on ScanSnap
to the saving of scanned images in PDF format.
■ Preparation
Operation
1. Make sure that the AC cable is connected to the scanner.
2. Make sure that the scanner is correctly connected to your PC.
3. Turn on your PC.
⇒ The "ScanSnap Manager" icon appears when Windows is started up.
4. Open the paper chute cover.
⇒ The scanner is turned on and the "ScanSnap Manager" icon will change from to .
HINT
You can connect the scanner to your computer after turning it on. When the
scanner is already connected to your PC, you do not need to reconnect it.
Paper chute cover
[POWER] button
To Next Page
Loading...
Need help?
General