34
3. Adjust the side guides to the document width.
Move the side guides so that there is no space between the document edges and the side
guides. If there is a space between the document edges and the guides, the scanned images
may be skewed.
HINT
If you use the stacker, scanned document sheets will not be separated when
they have passed through the scanner. For details on how to attach the stacker
to the scanner, refer to "Names and Functions of Parts" on page 3.
Use the stacker as follows.
1. Pull out the stacker towards you while holding it by its handle.
2. Insert your finger into the indent and lift up the stacker extension to clap it
out.
To Next Page
Loading...
Need help?
General