Furuno DRS4D User Manual

8
1.4 Mounting of Power Supply Unit
1.4.1 PSU-013 (for DRS25A)/PSU-012 (Option)
For combinations shown below, the optional power supply unit PSU-012 or PSU-017 is necessary.
The PSU-013 is required for any DRS25A installation
*: The power supply unit is shipped with 15A fuse. Replace fuse with 10A when using the unit with
24V ship’s battery.
*: The PSU-017 is available in the combination of DRS2D/4D and TZT9/14/BB. See section 1.4.2.
Contents of PSU-012/013
Name Type Code No. Qty Remarks
Power supply unit PSU-012 - 1
PSU-013 - For DRS25A
Cable assy VL3P-VV-S2X2C-AA050 000-152-217-11 1 5 m
LAN cable MOD-Z072-050+ 000-167-176-10 1 5 m, standard
Self-tapping screw 4x20, SUS304 000-158-850-10 4
Fuse* FGB0 250V 10A 000-155-839-10 2 For 24 VDC
FGB0 250V 15A 000-157-874-10 2 For 12 VDC
XH Connector Assembly 03-2345(2P) 001-183-760-00 1 For TZT9/14/BB
MFD8
MFD12
MFDBB
DRS2D/4D DRS4A
DRS6A
DRS12A
NO
NO
NO
NO
NO
NO
NO
PSU-012
NO
TZT9
TZT14
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012 or PSU-017*
PSU-012 or PSU-017*
TZTBB
PSU-012 or PSU-017* PSU-012 PSU-012 PSU-012

Furuno DRS4D Specifications

General

Brand	Furuno
Model	DRS4D
Category	Marine Radar
Language	English

Summary

Safety Instructions

Radio Frequency Radiation Hazard

Information on potential hazards and safe distances from radar emissions.

Compass Safe Distance

Guidelines for maintaining magnetic compass accuracy by observing safe distances.

Mounting

Mounting Considerations

Factors to consider for optimal radar sensor installation location and environment.

Mounting Procedure for DRS2D/4D

Step-by-step guide for installing the DRS2D/4D radar sensor.

Mounting Procedure for DRS4A/6A/12A/25A

Detailed installation steps for DRS4A, DRS6A, DRS12A, and DRS25A radar sensors.

Mounting of Power Supply Unit

Instructions on how and where to mount the radar's power supply unit.

Wiring

Wiring inside DRS2D/4D

Connecting cables within the DRS2D/4D radar sensor unit.

Wiring inside DRS4A/6A/12A/25A

Internal wiring instructions for DRS4A, DRS6A, DRS12A, and DRS25A radar sensors.

Wiring of Power Supply Unit

Connecting the power supply unit to the radar system components.

Specifications

Radiator Specifications

Details on antenna type, length, beam width, gain, and sidelobe attenuation.

Radar Function Specifications

Technical parameters for radar operation, including frequency, output power, and pulse settings.

Power Supply Requirements

Voltage, current, and type requirements for radar sensor and power supply units.

Environmental Conditions

Ambient temperature, relative humidity, degree of protection, and vibration specifications.

Coating Color

Specifies the color codes for the radar sensor and power supply unit.

Compass Safe Distance

Specifies safe distances for radar sensors and power supply units from magnetic compasses.