FMD 3X00 ECDIS – Pre-Monitor and change of watch - Checklist
Voyage number from to Date
Is Chart Viewing date set to AUTO?
Is the ENC Charts updated with latest temporary and preliminary notices
from e.g. NAVTEX
Is the Route Plan checked both visually and using the ECDIS’s automatic
check function before going to monitor mode – as recommended?
Please write the name of the present Route Plan(s) to be used for this voyage
Route Plan:
Route Plan:
Route Plan:
Please write the name of the present User Chart(s) to be used for this voyage
Route Plan:
Route Plan:
Route Plan:
Is the Route plan in monitor mode?
Is the User Chart in monitor mode?
Is the Chart Display set up according to company policy (Please see ECDIS Chart
Display Checklist
Is the Look Ahead Area active?
Is GPS1 input checked and found in order?
Is GPS2 input checked and found in order?
Is Gyro1 input checked and found in order?
Is Gyro2 input checked and found in order?
Is Speed Log input checked and found in order?
Is AIS input checked and found in order?
Is Radar Overlay checked and found in order?
Voyages lasting more than one week
If available: ENC Charts updated with latest Base and Update
DVD/CDs/download?
If available: ENC Charts updated with latest AIO DVD/CD/download?
ENC Charts updated with latest with latest temporary and preliminary notices from
e.g. NAVTEX
Navigation Officer of the watch Master
(If applicable)
© FURUNO MARITIME TRAINING a part of Furuno Denmark A/S 2016. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of FMT.
Z:\Training Courses\TST FMD\TST FMD {out of house}\03.17\04 Trainees Manual\Furuno ECDIS Trainee course manual version 4.0
44
To Next Page
Loading...
Need help?
General
