Fusion BB100 User Manual

Connects to a FUSION DAB module to receive DAB stations where available
(not included).
NMEA . NMEA 2000 network
USB I USB-compatible media device
15 A fuse
[ Power and speakers
Subwoofer, zone 1, and auxiliary device
4 -~ t Remo _ te _c_o_ nt _ ro_l ________ __ ~
Wiring Harness Wire and Connector Identification
.... ,
·=
...
I
. =~=====
,.
• K ·~~
(.2)
. ~~~~[:
• r t::::=
• ~c J,j::::
1 .. ru
l'''n
\...q}
• r:~=""
Ground(-)
Amplifier on
Mute
Dim
Speaker zone 1
left(+)
Speaker zone 1
left(-)
Speaker zone 1
right(+)
f-:--
Speaker zone 1
right(-)
~
Speaker zone 2
left(+)
Speaker zone 2
left(-)
Speaker zone 2
right(+)
some wire
harnesses)
- -+ -
Black
-+
Blue
Brown
Orange
White
White/black
Gray
-
Gray/black
Green
Green/black
Purple
Installation Instructions
-
-
c:~
~
~
11111111
J
Connects to the positive terminal of a 12 Vdc
power source capable of supplying 15 A. ~
Connects to the negative terminal of a 12 Vdc
power source capable of supplying 15 A. This
wire should be connected before connecting
the yellow wire. All accessories connected to
the stereo must share a common ground
location.
-
Connects to an optional external amplifier to
turn it on when the stereo turns on.
------
Activates when connected to ground .
For example, when connected to a compatible
hands-free mobile phone, the audio mutes or
the input switches to AUX IN when a call is
received and the phone connects this wire to
ground . This functionality can be configured
from the settings menu.
This wire is not used by this de
vice.
1----
1--
---
'
Auxiliary in left
Auxiliary in right
Zone 1 line out (left) )
Zone 1 line out (right) ]
Zone 21ine out (left) T
Zone 2 line out (right)
Subwoofer out
Provides a red and white RCA stereo line
input for audio sources, such as a CD or MP3
player.
~.
Provides a full-range output to an externa l
amplifier , and is associated with the volume
control for zone 1.
Provides a full-range output to an externa l
amplifier , and is associated w1th the volume
control for zone 2.
t
Each cable provides a single mono output to
a powered subwoofer or subwoofer amplifie r,
and one or both cables can be used , 1
depending on the connection requirements of
the subwoofer or amplifier .
1
A
connected subwoofer is associated with the I
volume control for zone 1.
-
Connecting to Power
When connecting the stereo to power, you should connect it through the
ignition or another manual switch.
If it is necessary to extend the power and ground wires, use 14 AWG
(2.08 mm
2
)
wire. For extensions longer than 1 m (3ft.), use 12 AWG
(3.31 mm
2
)
wire.
1 Route the power wire to the ignition or another manual switch , and
route the black ground wire ., to the battery.
+
2 If necessary, route a wire between the switch and the battery .
3 Route the wiring-harness plug to the stereo.
Do not connect the wiring harness to the stereo until after all of the bare
wire connections have been made.
4 Connect the black wire to the negative(-) battery termina l.
5 Connect the power wire to the ignition or another manual switch, and
connect the switch to the positive ( +) battery terminal if necessary.
6 Connect the wiring harness plug to the stereo.
NMEA 2000 System Wiring Diagram
D
Ef
)
3

Fusion BB100 Specifications

General

Brand	Fusion
Model	BB100
Category	Marine Audio
Language	English