17
TROUBLESHOOTING
Before going through the check list, please check the
wiring connection diagram. If problems persist, please
consult your supplier.
No power or no sound
• Ignition is not on. Turn the Ignition to “accessories”
• Unit is off - press the power button to activate the unit.
• Fuse is blown. Please replace the fuse.
• If the speakers are connected to the speaker outputs,
check the speaker connections.
UvÌiëi>iÀÃ>ÀiViVÌi`Ì>«wiÀÉÃÞ]ViV
that they are operating correctly.
• If the above solutions do not help, please press the RESET
button.
Noise in radio broadcasts
• Signals are too weak, turn LOC off.
• Check the antenna connection or replace the antenna if
necessary.
Unable to Eject Disc
• Press & hold the Eject button .
Display shows ERR-1
U /i 1- À - `iÛVi V>Ì Li Ài>`° wÀ Ìi
`iÛViÃvÀ>ÌÌi`Ìč/ÎÓ7`ÜîwiÃÞÃÌi°
Display shows ERR-3
• USB/SD data error. Check to ensure only MP3 or WMA
wiÃ>Ài>`i`ÌiÃÌÀ>}i`iÛVið
Display shows ERR-5
• Communication error. The USB/SD device could be
damaged or corrupted. Please re-format (Fat32 only) or
try a different device.
Bluetooth
• Depending on the Bluetooth version of the device, some
Bluetooth devices may not be able to connect with this head
unit.
• As Bluetooth is a wireless communication protocol, there
may be times where connection between the device and
head unit is lost or disrupted due to interference or other
signal quality disruptions.
• A2DP playback may be interrupted or playback speed
may vary, or playback may not resume automatically after
making or receiving a call.
• Some Bluetooth enabled mobile phones may only
stream music data. In this case the resultant playback
quality through the head unit will be low.
• Music or noise may be heard for a moment if music
streaming is taking place
• There may be occurrences where music cannot be
played through the head unit even though music is being
played back on the mobile phone.
To Next Page
Loading...
Need help?
General
