Original Bedienungsanleitung FUXTEC FX-IG13_de_en_fr_ita_rev04
29
16 MAINTENANCE
No cleaning, upkeep, checks or maintenance when machine is running!
Shut off the machine and let it cool down before start servicing!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original FUXTEC parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
16.1 Maintenance plan
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified
hours of operation (HOO) have expired.
16.2 Cleaning
•
We recommend cleaning the machine immediately after each use.
•
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible
•
Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air at low
pressure.
Do not use cleaning agents or solvents; these could attack the plastic parts of the machine!