Gardena FlexControl User Manual

Controls [ Fig. F1 ]:
The watering programme is easily entered using the
controls.
A watering program comprises the watering start
time, duration and frequency.
Buttons Function
1
OK button
Applies the values set with the + button.
2
+ button
Changes the input data.
3
Rotary knob
Selects the program parameters.
Display [ Fig. F2 ]:
Display Description
5
Flash consecutively whilst watering is
carried out.
6
Flashes when the battery needs to be
replaced. The valve is still opened for
4weeks.
Is continuously displayed when the bat-
tery is empty. The valve is not opened
any more.
Replace battery (see 3. PUTTING YOUR
WATER COMPUTER INTO OPERATION
“Insert battery”).
7
Sensor
/
Sensor
Indicates that the sensor registers dry
and the programmed watering is carried
out.
Indicates that the sensor registers wet
and the programmed watering is not
carried out
(see 3. Putting YOUR WATER
COMPUTER INTO OPERATION “Con-
nect soil moisture or rain sensor”).
8
Program times
9
Watering cycle
20
EN

Gardena FlexControl Specifications

General

Brand	Gardena
Model	FlexControl
Category	Control Unit
Language	English