6. Set the start time hours (example: 18 hours)
with the + button and confirm with the OK but-
ton.
The start time minutes flash.
7. Set the start time minutes (example: 30 minutes)
with the + button and confirm with the OK but-
ton.
Set watering duration
[ Fig. P3 ]:
8. Turn the rotary knob to
.
The duration hours flash.
9. Set the duration hours (example: 0 hours) with
the + button and confirm with the OK button.
The duration minutes flash.
10. Set the duration minutes (example: 20 minutes)
with the + button and confirm with the OK but-
ton.
Set watering cycle (day, frequency)
[ Fig. P4 ]:
The watering days can be selected directly (Mo to
Su) or every 2nd (2nd) or 3rd (3rd) day. On the
watering day, the watering frequency can be set to
1x (every 24 hours), 2x (every 12 hours) or 3x (every
8 hours) respectively.
Comfort function: Watering is performed every
day if only the watering frequency is selected.
11. Turn the rotary knob to
. Mo flashes.
12. Select the days (e. g. Mo and Sa) with the + but-
ton and confirm / deselect with the OK button.
A bar is displayed beneath the selected days.
13. Set the frequency (e. g. 2x = twice in 24 hours)
with the + button and select with the + button
and confirm / deselect with the OK button.
A bar is displayed beneath the selected
frequency.
Activate program (Prog):
14. Turn the rotary knob to Prog.
The program is activated.
Next watering start time and day:
The next programmed watering start time and start
day can be displayed if the rotary knob is turned to
Prog.
v Press the OK button.
The next watering start time and start day is dis-
played.
Important information:
If the subsequent day is not a watering day, the
watering will stop at 12:00 a.m.
23
To Next Page
Loading...
Need help?
General
