Garmin zumo User Manual

Acquiring GPS Signals
To navigate with your device, you must
acquire satellites . .. 111 in the status bar
indicates the satellite signal strength.
Acquiring satellites can take several
minutes.
1 Turn on the device.
2 Wait while the device locates
satellites.
3 If necessary, go outdoors to an open
area, away from tall buildings and
trees .
Entering and Exiting Sleep Mode
You can use sleep mode to conserve
battery power when your device is not in
use . While in sleep mode , your device
uses very little power and can wake
instantly for use.
2
TIP: You can save power by putting the
device in sleep mode while charging the
battery.
Press the power key CD .
Turning Off the Device
1 Hold the power key until a prompt
appears on the screen.
The prompt appears after five
seconds. If you release the power key
before the prompt appears, the device
enters sleep mode.
2 Select Off .
Transportation Modes
Routing and navigation are calculated
differently based on your transportation
- -- ---- ·----·---

Garmin zumo Specifications

General

Brand	Garmin
Model	zumo
Category	Car Navigation system
Language	English