48 49
2. Continuous blending action
Conventional blades KINETIX blade and jug system
The Kinetix Blade System ensures there are no spaces for food to get caught or trapped. The
extra wide blades are contoured to the base of the blender jug meaning food can never jam
or escape the high speed blades. There are no dead zones, so food is 100% blended with
no over or under blended ingredients.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
Disassembling the blender jug
1. Always turn the appliance ›Off‹ (all buttons are deactivated), wait
until the motor stops and unplug the appliance before assembling/
disassembling. Always completely assemble your appliance before
you put the plug into the power outlet.
2.
Remove the blender jug from the motor base by grasping the handle
and lifting the jug in an upward direction.
3. Take the lid off the blender jug and empty the blender jug (picture
A).
4. Take the clear inner lid and twist it into the direction you are able to
move it to take it out. Pull the inner lid up to remove it (picture B).
Note: The inner lid has two small guiding pins that fit in the matching
gaps of the lid. Depending on the direction you turned it when lock-
blade & jug
System
pic A
pic B
To Next Page
Loading...
Need help?
General
