Operating
Before first use
After unpacking, remove all promotional and packing materials as well as any foreign objects.
Operate the appliance on a well accessible, stable, level, dry, and suitable large surface.
WARNING: Do not leave young children play with the appliance or any part of it or
the packing material.
Before first use and after a long period of storage, clean the appliance with a damp soft
cloth and warm soapy water (see ‘Care and Cleaning`).
Assembling the appliance
Before each use, ensure Coffee Bean Container and Coffee Container are clean and empty.
1. Place Coffee Bean Container into Grinding Chamber
with ‘Align’ arrow symbol on the
Coffee Bean Container
aligning with the ‘Align’ arrow symbol on top left-hand side
of the Grinder Base (picture A). Turn the Bean Container
clockwise to lock into position. If the Align’ arrow symbols
are not aligning you can not get the Coffee Bean
Container off or on the Grinding Chamber.
Rotate the Bean Container clockwise to select the desired
fineness of grind by aligning one of the following selections
to the white marker on the front panel of the Grinding
Base (see ´Grind Selector Control`) (picture B).
ATTENTION: If the Coffee Bean Container is filled
with coffee beans you can only change the Grinding
Selector setting while the motor is running!
2. Place Bean Container into position and make sure the
Coffee Container is locked into position (picture C). The front
of the Coffee Container has to be in line with the motor housing.
NOTE: The appliance has a circuit breaker. If the
Coffee
Bean Container
and the Coffee Container are not in proper
position you can not turn the appliance on.
3. Plug the Grinder into a 230/240v power outlet. The appliance is now ready for use.
19
A
C
B
42602_DesignKaffeemuehleAdvanced_Manual.qxp 12.01.2007 13:37 Seite 19
To Next Page
Loading...
Need help?
General
