55
Press UP or DOWN arrow to adjust the time.
Clean Cycle
Press MENU button until CLEAN CYCLE icon
flashes and PUSH is displayed on the LCD
screen.
To start the CLEAN CYCLE press the illumina-
ted MANUAL button.
The CLEAN CYCLE icon will flash and the
machine will start to countdown from 320
seconds.
The machine will return to STANDBY when
the cleaning cycle has ended. Refer to clea-
ning instructions.
Resetting Default Settings
The machine has the following default set-
tings:
1.Temperature–93°C
2. Pre-Brew Infusion – PP60, PT5 seconds
3. Auto Start - OFF
4. Auto Start Time - 7.00am
5. Audio - LO
To reset machine to original default settings,
first ensure machine is switched off. Press
and hold 1 CUP & 2 CUP buttons and then
press the POWER button.
The LCD will display REST. All programmed
settings will be reset to the original default
setting.
The machine will return to STANDBY mode.
ADVANCED FUNCTIONS
Press & hold 1 CUP button to deliver water
to the group head at full pump pressure and
release button to stop extraction.
Press & hold 1 CUP by-passes the pre-infu-
sion step and delivers water to the group
head at the full 9 bar pressure. This function
can be used when purging the group head.
Press & hold 2 CUP button to deliver water
to the group head at full pump pressure and
release button to stop extraction.
Press & hold 2 CUP by-passes the pre-infu-
sion step and delivers water to the group
head at the full 9 bar pressure. This function
can be used when purging the group head.
To Next Page
Loading...
Need help?
General
